Categories
General

Command Engine

Another mode of transmission is that the command is passed on regular wire car by a weak signal, similar to the interference from the spark plugs. The advantages of this method is that no wires are not connected directly to the alarm system and the output relay, hence the name of the relay – 'Wireless'. It can be hidden in a bundle of regular wires, find and neutralize it is practically impossible. But this method requires more security team itself – theoretically it can 'eavesdrop' and write any wire a car, so the commands must be encrypted variable code. The third way to – on the radio.

The security system is equipped with a transmitter, and the output relay – receiver. More information is housed here: David Treadwell. This method advantages of wireless relay continues, but has some limitations related to the fact that getting the team to allow the engine may be difficult because of interference. Situational relay may be possible to to determine what is blocking relay circuit, the absence of any signal or even the diagnostic reports a car. To prevent this, the digital relays are becoming more complex, and are ability to decide when they lockable chain must be restored, and when – no. For example, the relay can simulate engine failure, while taking into account what sort of circuit blocks it, and install the degree of 'seriousness' fault. This approach to the blocking of the engine is possible only if the security system of communication between its modules and actuators. Class channel management The most common and convenient control channel security system is to control the radio, using the remote control.

Categories
General

Komsomolskaya Pravda

Deputy CEO Alexander Aniskevich in his speech suggested that the history of the car with the classic manual transmission has ended. The usual car, in his opinion, is the efficiency performance (COP) at 17%. Such an ‘exhaust’ is not much better than a locomotive. This is akin to potato cultivation in the USSR, where most of the crop remained in the fields. And this failure of industrial society – the previous day, quoted him as saying “Komsomolskaya Pravda”. Modern electric cars being developed by foreign automakers, according to him, too inefficient, because Lithium-ion batteries, they are equipped to spend too a lot of electricity.

In addition, sub-zero temperatures the lithium-ion batteries will not charge – so, they need extra heat, so this too great loss. For the harsh Russian – this is not an option. Resource Lithium-ion batteries, according to the speaker, small – only 10 000 cycles, though they cost 15 000 dollars. A worthy alternative to petrol cars neekologichnym and international electric vehicle lithium-ion batteries – this is E. car 20-liter fuel capacity (gas / petrol) would last for 1,100 kilometers. In this motor, issuing 600 Nm of torque, even at the lowest speed range, will drive cross-coupe ‘E’ up to 100 km in 7 seconds, and Coach – 8 seconds, Aniksevich said. Fuel engine E-Mobile has a rotor-impeller structure and consists of only 68-of details. The body is made on the principle of ‘monocoque’ consists of ‘a couple of dozen parts’ and is formed entirely with interior elements.

Body material – a composite filled with polypropylene. Cook, prime and paint the body of E-Mobile is not necessary – the color of the material is given once during molding. Filling the body has a cellular structure: when struck, he hesitated, ‘swallowing’ the energy of impact, but without disturbing the internal geometry, as it has integrated ribs. True, the repair of body parts will not be subject to. But, according to Aniksevicha, replacing even the whole body cost about 4000 rubles, which is much cheaper body repair with color. According to the report as it is supposed not only to net sales of E-car, but also the transfer of user machines on loan – with the monthly rents and the possibility of redemption (this principle is implemented in many countries). Moreover, in the amount of rent (10 000-14 000 rubles) will include routine maintenance, including replacement .

Categories
General

Water Recycling

Sale of treatment facilities for auto-closed loop, under the name Flamingo, also in demand by consumers. This equipment belongs to the flotation-filtration installations range of FFU. Extended the scope of the water recycling systems, allowing treatment to apply for car Flamingo and food industry, and in the road sector, and households to purify water from rain run-offs, makes this equipment is very popular. One important feature of the wastewater treatment plant flamingo is universality of its use: install and Flamingo suitable as an intermediate stage of water purification and as a primary care treatment facility. Ability to select the necessary equipment, which maximally satisfy all customer requirements – a significant plus of this equipment. Removable storage tank for water, extra pumps, water treatment up to 97%.

Of the downsides of this operation should be noted plants for sewage treatment only in closed environments with zero temperature, which is not always convenient for equipment car wash. Similar characteristics to the installation of wastewater treatment system and the Flamingo has SCAT. She also referred to as the model range of treatment FFU. When cleaning and preparing the water in this system can be used not only mechanical and chemical cleaning methods. German quality treatment Car wash facilities can be tested using water recirculation systems KARCHER. For example, KARCHER HDR 555 is used to clean water and make it reusable, as well as saving detergent. System water recycling KARCHER HDR 555 clears the water used for cleaning not only the surfaces of the car, but its internal parts.

Cleaning and preparation of water under pressure and then applying technology to regenerate this plant occurs at a rate of 200 liters per hour. Dirty waste water is purified in the installation with strainer and chemical ingredients that contribute to the splitting of water molecules and other substances. Together with KARCHER car wash wastewater treatment no less in demand and water recycling systems for car washes APOC. This equipment can save up to 90% water and reuse it for washing cars. Water treatment through recycling systems APOC occurs through the drainage system, sterilization, removal of odors and water through a lot of sand and gravel filters. At the plant output purified water fed under pressure and completely reusable. Plus: a simple and easy to use design and operation of treatment plants for car APOC suitable for use in any climatic conditions. Less: after using the prepared and purified water through a system of water recycling by the manufacturers APOC recommends rinsing the car with clean water (not from the installation of a water). Make the right choice to be with you, but in any case, giving preference to one or another manufacturer for car cleaning, remember that your choice will depend on the success and well-established work of all components of your business.

Categories
General

The Minsk Automobile Plant

In the summer of this year, the Minsk Automobile Plant joined the Association of Russian Automakers. Such a step is not accidental, because the products produced by MAZ, consumed it in our market. Prospects and horizons MAZ On the territory of Russia are working 58 Minsk Automobile dealers and organized dozens of certified service stations Maz. Minsk Automobile Plant is a daily work upgrading of basic designs, are used extensively promising technologies, expanding product range and volume of production. Considerable attention is paid developers MAZ environmental output products, which is considered obligatory criteria of the European quality.

Manufactured products MAZ presents widely on a variety of exhibitions held outside Belarus. Some new items in the this year were shown at the Russian Exhibition "Comtrans-2008. But Minsk manufacturers of trucks and buses do not plan to be limited expanse of the Russian market in September MAZ involves participate in a prestigious exhibition in Hanover. There will be a competitive show for the city bus that meets the most stringent European standards. A wide range of products The list of MAZ Minsk Automobile products is quite wide.

Automotive Technology MAZ includes many popular trucks: medium-duty and on-board vehicles, tractors and dump trucks. At the MAZ manufactured auto mixers, truck cranes, road tankers, cement trucks, cranes, semi-trailers and food tanks. Also, on the MAZ establish different model Vans (industrial, insulated, isothermal, refrigerators, furniture, car repair, etc.). Communal motor-vehicle supplied by MAZ, includes sewage, ilososnye, vacuum machines and Cars for debris removal. In addition MAZ succeeded in producing trailers, trailers and buses. Leasing MAZ order to become the owner of MAZ, there is no need to pay the entire amount at once. In addition to various forms of lending acts very convenient option of leasing. Leasing program provides an opportunity to rent a motor-vehicles for the period from six months to 15 years. Benefits from such schemes are many. Firstly, it is possible to continually update an aging vehicles, entering into an agreement to lease a new technique. Second, the lease payments include the cost of products that can reduce tax payments. Thirdly, there is no need to expend their own capital to purchase machinery, being able to take advantage of the loan. Usually, taking into account the depreciation of fixed assets and is engaged in the lessor, which allows significant simplify accounting. Minsk Automobile Plant produces accurate and competitive products, supplying it with a convenient service, are contributing to the widespread dissemination of motor vehicles MAZ in the markets of the Commonwealth of Independent States and beyond its borders.

Categories
General

Cement

Scope. Cement is a highly specialized machine and is designed to transport cement. This does not apply to vehicles tractors, which can easily change the trailer to another. The possibility of such Car is much broader. But resort to this is not required, because today many require the services of cement. A simple man in the street used to buy cement in bags and special for him in this matter is clearly superfluous. This unit intended for industrial buildings, or for the delivery of large volumes of the regions.

When you need to buy cement, and several tons, it is best to use the services of cement. Classification of cement. Main way, cars are divided into self-loading and self-loading. To date, the most widely used tank equipped samorazgruzkoy. Using this type of technology allows minimize labor costs and make the cement more autonomous and complete the shipping agent. There is an opportunity to carry cement from point A to point B without using an additional equipment. The device is known cement cement is a fine, gray dust that is easily inflated even very light wind.

Of course, if you carry it in the back, the end of the road vehicle is empty. That is why the main part of the cement is all metal, sealed tank. To cement the old model, for ease of unloading cement tank installed at a slight angle. At today's special technique to resort to such tricks are not required and the tank is mounted vertically, which makes it possible to use containers larger. Important detail is to cement the compressor. To fill the tanks with gray powder must somehow tighten the inside and unloading should be pulled. In the case of liquids, this problem can be solved very easily. Opened the valve and the problem is solved. Cement did not flow, and not getting enough sleep. Therefore, for these works to create negative pressure inside the container and then the powder will delay construction, but if you create a positive pressure, the cement would push outward. Compressor and serves to In order to meet these seemingly contradictory processes. Therefore, it can be called 'compressor – vacuum pump. " Worth mentioning that the construction of the cement makes it possible to transport any finely divided loose materials. For example, gypsum or flour. Of course, that the second example is less successful, since the mixing of food with non-food – is unacceptable, but it allows the possibility of closer understanding of the machinery.

Categories
General

Dent Removal

Modern development of new technologies in the automotive field, to date, to avoid costly repairs by auto body straightening with PDR. What is it? Car owners are often faced with problems, but a deep dent of the collision, the impact of a heavy object, for example, when a car falls wood, stone, etc. Now, applying the technology to remove dents bespokrasochnoe, vehicle significantly improved quality and cost of the proposed service, which should please owners of transport. The technology is simple: with the help of massage, which is done on the damaged parts on the inside and outside, restored geometry of the body without damaging paintwork. For the detection of dents and scratches, the wizard uses a special lamp, which also affects the better the quality of repairs. Depending, of of damage to the carrying out repair dents without paint, the master can use to bump draft from the outside and the adhesive system to lift the metal from inside the damaged spot.

In Russia, the technology used PDR relatively recently, but it has already proved themselves to be obvious advantages. Applying the PDR technology in removing dents St. Petersburg, will not have to use abrasives, paints and putty is engaged in the selection colors. The whole repair process takes a minimum amount of time that is not more than one hour. The only negative point in the repair of dents in straightening is a must: no be damaged paint on the details.

Repair PDR technology is possible if the depth of the dent is not too big and its location, the machine is released after 1990. Through remove dents without painting of St. – Petersburg, this means that the owner of the car will not have to endure the inconvenience associated with the need to do without cars for a while. This technology provides the opportunity to keep the car from the factory paint, which means that the sale will not have to throw off the cost of the car – because it was held to cover repair coatings.